FLIR ONE Pro Thermal Camera | Transform Your Smartphone into a Powerfu
- Home
- FLIR ONE Pro Thermal Camera | Transform Your Smartphone into a Powerful Thermal Imaging Device
FLIR ONE Pro Thermal Camera | Transform Your Smartphone into a Powerful Thermal Imaging Device
Regular price
$792.00
Sale
The FLIR ONE Pro helps you find invisible problems faster than ever, whether you're inspecting electrical panels, troubleshooting mechanical systems, looking for HVAC problems, or finding water damage. This FLIR ONE Pro-Series camera offers 4x the native resolution of the FLIR ONE Pro LT, for sharper image clarity that's further enhanced by the revolutionary FLIR VividIR™. Measure temperatures more than 3x higher than any FLIR ONE model—up to 400°C (752°F)—with a sensitivity that detects temperature differences down to 70 mK. Packed with powerful measurement tools, the FLIR ONE Pro will work as hard as you do.
SPECIFICATIONS
- Thermal Resolution
- 160 × 120
- Battery life
- Approximately 1 hr
- Object Temperature Range
- -20°C — 120°C (–4°F — 248°F) and 0°C — 400°C (32°F — 752°F)
- Phone
- iOS
- Accuracy
- ±3°C or ±5%, typical Percent of the difference between ambient and scene temperature. Applicable 60 sec after start-up when the unit is within 15°C — 35°C and the scene is within 5°C — 120°C.
- Operating Temperature
- 0°C — 35°C (32°F — 95°F) , battery charging 0°C — 30°C (32°F — 86°F)
- Spot Meter
- Hottest, Coldest and 3 spot measurement
IMAGING & OPTICAL
- Adjustable MSX distance
- 0.3 m — Infinity
- Focus
- Fixed 15 cm — Infinity
- Frame Rate
- 8.7 Hz
- General Description
- Thermal and Visual Cameras with MSX
- HFOV/VFOV
- 50° ±1° / 43° ±1°
- Palette
- Gray (white hot), Hottest, Coldest, Iron, Contrast, Arctic, Lava and Color Wheel
- Shutter
- Automatic/Manual
- Thermal Resolution
- 160 × 120
- Thermal Sensor
- Pixel size 12 µm, 8 — 14 µm spectral range
- Video and Still Image Display/Capture
- Saved as 1440 × 1080
- Visual Resolution
- 1440 × 1080
POWER
- Battery charge time
- 40 min
- Battery life
- Approximately 1 hr
MEASUREMENT & ANALYSIS
- Accuracy
- ±3°C or ±5%, typical Percent of the difference between ambient and scene temperature. Applicable 60 sec after start-up when the unit is within 15°C — 35°C and the scene is within 5°C — 120°C.
- Object Temperature Range
- -20°C — 120°C (–4°F — 248°F) and 0°C — 400°C (32°F — 752°F)
- Spot Meter
- Hottest, Coldest and 3 spot measurement
GENERAL
- Battery charge monitor
- 0 — 100%
- Dimensions (H x W x D)
- 68 × 34 × 14 mm (2.7 × 1.3 × 0.6 in)
- Phone
- iOS
- Weight
- 36.5 g
ENVIRONMENTAL & CERTIFICATIONS
- Certifications
- MFi (iOS version), RoHS, CE/FCC, CEC-BC, EN61233
- Emissivity Settings
- Matte: 95%, Semi-Matte: 80%, Semi-Glossy: 60%, Glossy: 30%
- Non-Operating Temperature
- -20°C — 60°C (-4°F — 140°F)
- Operating Temperature
- 0°C — 35°C (32°F — 95°F) , battery charging 0°C — 30°C (32°F — 86°F)
COMMUNICATION & DATA STORAGE
- Capture modes
- Video, Still image
- Charging
- Female USB-C (5V/1A)
- File Formats
- Radiometric JPG, MPEG-4 (file format MOV)
- Video
- Male Lightning
The FLIR ONE Pro Thermal Camera revolutionizes thermal imaging by combining professional-grade capabilities with the convenience of your smartphone. With its sleek and compact design, this powerful device allows you to explore the world of thermal imaging at your fingertips.
High-Resolution Thermal Imaging: Equipped with FLIR's advanced thermal imaging technology, the FLIR ONE Pro Thermal Camera captures stunning thermal images with its high-resolution sensor. With a thermal resolution of up to 160 x 120 pixels, this camera provides exceptional image quality, allowing you to identify temperature variations, energy inefficiencies, and potential issues with precision.
Enhanced Image Detail: The FLIR ONE Pro Thermal Camera features FLIR's patented MSX® (Multi-Spectral Dynamic Imaging) enhancement technology. By overlaying visible light details onto the thermal image, MSX® technology enhances the overall image clarity and detail, making it easier to interpret and understand thermal patterns and hotspots.
Powerful Thermal Analysis Tools: The FLIR ONE Pro Thermal Camera is accompanied by the FLIR ONE app, which offers a range of powerful analysis tools. From spot metering and temperature measurements to multiple temperature spot analysis, the app allows you to extract valuable insights from your thermal images. You can save, share, and analyze your thermal data effortlessly, making informed decisions and driving efficiency in your work.
Versatile Connectivity: The FLIR ONE Pro Thermal Camera connects to your smartphone through a USB-C or Lightning connector, providing real-time thermal imaging directly on your device's screen. This seamless connectivity ensures a smooth user experience, allowing you to capture and analyze thermal images instantaneously.
Rugged and Portable Design: Built to withstand demanding environments, the FLIR ONE Pro Thermal Camera features a durable and rugged design. Its compact size and lightweight construction make it easy to carry in your pocket or toolbox, ensuring that you have thermal imaging capabilities wherever your work takes you.
Wide Range of Applications: The FLIR ONE Pro Thermal Camera is a versatile tool suitable for various applications. Whether you are an HVAC technician, building inspector, or DIY enthusiast, this camera can help you identify energy inefficiencies, detect water leaks, assess electrical systems, and perform countless other thermal imaging tasks.
Unleash the power of thermal imaging with the FLIR ONE Pro Thermal Camera. This innovative device offers professional-grade thermal imaging capabilities on your smartphone, providing you with a compact, portable, and versatile tool for temperature visualization and analysis.
One-year replacement warranty
We offer the most comprehensive warranty in the Australian restoration equipment industry.
One-year replacement warranty:
- The one-year replacement warranty (the Warranty) applies to any Thorair:
- dehumidifier;
- air blower/mover; and
- air scrubber,
that is purchased from Thorair or All Imports (a Covered Product).
- The Warranty may only be claimed within 365 days of the purchase date of a Covered Product. To remove ambiguity, the purchase date is the invoice issue date and is not the invoice due date, date that payment is made or the date that the item is received.
- Only the party that the invoice is addressed to (an Authorised Claimant) may make a claim under this Warranty.
- An Authorised Claimant may make a claim pursuant to this Warranty on a Covered Product if the product is defective because of a manufacturer defect. A manufacturer defect is:
- any defect in the product that is the fault of the manufacturer, Thorair; and
- that would ordinarily be defined or interpreted under a statute (e.g. Australian Consumer Law) as a faulty product or a product that is not fit for its purpose.
- No party can make a claim pursuant to this Warranty if the defect in the Covered Product is its own fault, whether wholly or partially.
- This Warranty is voided:
- upon resale of the Covered Product;
- if the Covered Product is opened or tampered with in any manner that is not consistent with its use, including (but not limited to) unscrewing screws to inspect its contents;
- if the Covered Product was provided to the claimant at a discount greater than 22.5 percent; and
- if the customer has published an unfair review of Thorair or its associated ventures to any third party, whether online or not, where an unfair review is one that, in accordance with objectively reasonable standards, is not a fair and just reflection of Thorair’s dealings;
- This Warranty does not interfere with any warranty that exists pursuant to the general law, including warranties under the Australian Consumer Law, and a claimant’s inability to claim under this warranty does not necessarily implicate that the claimant cannot make a claim under the Australian Consumer Law. Thorair recommend that all its customers read and review the Australian Consumer Law to review statutory entitlements and rights.
- This Warranty is provided in good faith to its Authorised Claimants, and consequently, if there is any confusion, inconsistency or dispute concerning a clause contained herein, such clause shall be read down in favour of Thorair.
- Thorair will replace a Covered Product that has a manufacturer defect if an Authorised Claimant makes a claim within the allotted time period.
- For Covered Products that were issued over 200 days ago, the Authorised Claimant shall pay for freight to have that Covered Product returned to Thorair.
- Once a Covered Product is returned to Thorair, Thorair shall distribute, at their own freight cost, a brand-new product of the exact same specification to the Authorised Claimant.
- If Thorair does not have the exact same product in stock, and an Authorised Claimant makes a claim under this Warranty within 365 days, Thorair, at its own elective, may chose to:
- repair the product itself, but pay for shipping irrespective of time elapsed;
- refund the customer; or
- make an agreement with the customer to perform some other task in the customer’s favour.
- This is a warranty. Thorair is interchangeable with All Imports Pty Ltd.
- To make a claim, strictly following all above provisions, an Authorised Claimant must notify Thorair of the grounds of its claim via email. The Authorised Claimant bears the onus of proof/evidence.
One-year replacement warranty
We offer the most comprehensive warranty in the Australian restoration equipment industry.
One-year replacement warranty:
- The one-year replacement warranty (the Warranty) applies to any Thorair:
- dehumidifier;
- air blower/mover; and
- air scrubber,
that is purchased from Thorair or All Imports (a Covered Product).
- The Warranty may only be claimed within 365 days of the purchase date of a Covered Product. To remove ambiguity, the purchase date is the invoice issue date and is not the invoice due date, date that payment is made or the date that the item is received.
- Only the party that the invoice is addressed to (an Authorised Claimant) may make a claim under this Warranty.
- An Authorised Claimant may make a claim pursuant to this Warranty on a Covered Product if the product is defective because of a manufacturer defect. A manufacturer defect is:
- any defect in the product that is the fault of the manufacturer, Thorair; and
- that would ordinarily be defined or interpreted under a statute (e.g. Australian Consumer Law) as a faulty product or a product that is not fit for its purpose.
- No party can make a claim pursuant to this Warranty if the defect in the Covered Product is its own fault, whether wholly or partially.
- This Warranty is voided:
- upon resale of the Covered Product;
- if the Covered Product is opened or tampered with in any manner that is not consistent with its use, including (but not limited to) unscrewing screws to inspect its contents;
- if the Covered Product was provided to the claimant at a discount greater than 22.5 percent; and
- if the customer has published an unfair review of Thorair or its associated ventures to any third party, whether online or not, where an unfair review is one that, in accordance with objectively reasonable standards, is not a fair and just reflection of Thorair’s dealings;
- This Warranty does not interfere with any warranty that exists pursuant to the general law, including warranties under the Australian Consumer Law, and a claimant’s inability to claim under this warranty does not necessarily implicate that the claimant cannot make a claim under the Australian Consumer Law. Thorair recommend that all its customers read and review the Australian Consumer Law to review statutory entitlements and rights.
- This Warranty is provided in good faith to its Authorised Claimants, and consequently, if there is any confusion, inconsistency or dispute concerning a clause contained herein, such clause shall be read down in favour of Thorair.
- Thorair will replace a Covered Product that has a manufacturer defect if an Authorised Claimant makes a claim within the allotted time period.
- For Covered Products that were issued over 200 days ago, the Authorised Claimant shall pay for freight to have that Covered Product returned to Thorair.
- Once a Covered Product is returned to Thorair, Thorair shall distribute, at their own freight cost, a brand-new product of the exact same specification to the Authorised Claimant.
- If Thorair does not have the exact same product in stock, and an Authorised Claimant makes a claim under this Warranty within 365 days, Thorair, at its own elective, may chose to:
- repair the product itself, but pay for shipping irrespective of time elapsed;
- refund the customer; or
- make an agreement with the customer to perform some other task in the customer’s favour.
- This is a warranty. Thorair is interchangeable with All Imports Pty Ltd.
- To make a claim, strictly following all above provisions, an Authorised Claimant must notify Thorair of the grounds of its claim via email. The Authorised Claimant bears the onus of proof/evidence.
